SIGMA Superlatex Classic

Sale SIGMA Superlatex Classic SIGMA Superlatex Classic

SIGMA Superlatex Classic

Superlatex klassiek verf Oprettet den voor het schilderen van Muren da PLAFONDS. Ook aanbevolen voor het schilderen behang glasvezel Sigmascan systeem. Produktinfos

Required: fill in "white" or a color code above

€ 59,90 inkl. MwSt. (23%)

In den Korb

Produktinfos

 

  

HOW TO PREPARE THE GROUND


Old layers of paint and poorly connected and peeling should be carefully removed , and the substrate with water. Surface to be painted should be clean , dry and free from dust , without cracks , as adjusted absorbency . Repairs surface materials should be carried out without the lime content . Both fresh and old plaster and highly water absorbent substrates ( gypsum and gypsum plaster , plasterboard , ground never painted ) should be primed with Sigmafix Universal. Surfaces painted with emulsion paints must be degreased by washing with water and detergents ( eg soap painting ) . Remains of paint , carefully remove the adhesive and the substrate with water. Surfaces painted with alkyd must be cleaned and roughened to improve adhesion . Smooth surfaces , without the structure should be carefully aligned. Bothersome stains and grease secure with Sigma Sigma Renomat brand .

 
painting


Fresh cement-lime plaster can be painted after 3-4 weeks of their application. Before using the product thoroughly and, if necessary , dilute with water to a maximum . 5 % vol . The recommended number of layers 1-3 (depending on the degree of saturation of the color and opacity ) . Another layer without dilution should be applied after 2h. Upon completion of painting tools should be cleaned with water.

 
For color hard covering should use the recommended primer coloring system .
Painting must be carried out at substrate and ambient +5 to + 30 ° C and a relative humidity of 40% - 80 %. Not recommended for application of the product at low relative humidity.
Full mechanical properties of the coating obtained after 4 weeks .
Lower temperatures and higher relative humidity prolongs drying. Waterborne , resistant to frost . Keep at temperatures above 0 ° C in a cool and dry area.
White product is not intended for use in a computer system coloring . Using traditional methods of application (eg, roller , brush ), and improper selection of tools , the technique of painting and unfavorable conditions ( temperature and relative humidity) it is possible that some of the streaks colors.
Some colors are available in the computer system coloring, different batches of the product after zakolorowaniu may vary slightly tinged . In order to avoid differences is necessary to make the surface of which constitutes a distinct architectural whole in a single operation , products from the same production batch . If you have products from different production batches is recommended to mix them together in order to unify the shade. Any amendments must be made "wet on wet" . Prior to application of the product , please check the compatibility of color in all packages with the order .
Paint meets all the requirements of the Technical Conditions of Execution and Acceptance of Construction Works described in the booklet ITB No. 387/2011 Part B: Finishing Works , Volume 4: Coatings inner and outer section . 6 Requirements for coatings .

Safety precautions and fire

Adhere to the instructions given on the package.
Details are provided in the Safety Data Sheet.

colors:

White and colors available in the computer system coloring Color Pro


Finish :
mat

The method of painting :
Brush, roller, spray

Commercial package :
1 l, 5 l, 10 l white ;
1 l, 5 l, 10 l base LN, ZN

Download

Comments

No customer comments for the moment.

Write your review

SIGMA Superlatex Classic

SIGMA Superlatex Classic

Superlatex klassiek verf Oprettet den voor het schilderen van Muren da PLAFONDS. Ook aanbevolen voor het schilderen behang glasvezel Sigmascan systeem.

Write your review

30 other products in the same category: