Plastic profile with integrated fabric strip for a decoupled connection between plaster and on-site laminations.
Plastic mounting profile
Decoupled connection option for on-site laminations
Accurate recording in one flight by connector mounting
Targeted water management
Cardboard box of 25 pieces
For finishing the edges of corners with sharp or flared angles within Capatect systems.
125 x 125 mm fiberglass mesh profile with inner plastic cutter
The arms of the angle bar are not connected rigidly, which allows for individual fit in the case of sharp and bifurcated corners
Edges can be precisely prepared
Prevents the mesh from...
Description / Material
Preformed glass fabric profile for simultaneous use as an inner corner as well as a diagonal reinforcement.
High tensile strength
Mesh size 4 x 4 mm
For the formation of vertical expansion joints within the Capatect ETICS A and B.
Type E: for flush joints
Type V: for joints in interior corners
Expansion joints can be precisely pre-worked
can be painted over
efficient execution in one operation
suitable for all insulation thicknesses
For forming ends or separating surfaces of plastering expeditions. Allows accurate and clean lateral separation of different structures or colors in one working plane.
- Plastic profile, perforated, with separating edge
- The same mesh as in the reinforced layer (preserved system materials)
- UV resistant
- Clean and clear...