For mineral substrates exposed to medium to very high mechanical and chemical loads
how: flooring in the automotive, metallurgical and electrical industries.
Application
Almost odorless
Can be used as a self-priming coating, on primed substrate with sprinkling
Resistant to chemicals
Possibility to adjust the curing process by using DisboADD 903
Easy in application
Properties
Binder two-component epoxy resin
Store in a cool and dry place.
Material stored at lower temperatures should be at least 24 hours before
starting work move into the room at a pace. okay. 20°C where the work will be carried out.
In the original closed packaging can be stored for at least 1 year.
Method of use
Concrete and cement screed and rigid epoxy coatings.
The substrate must be load-bearing, strong, stable, free of loose particles, dust, oils, fats,
residues of worn rubber and other substances that reduce adhesion.
The surface peel strength shall be on average 1,5 N / mm2 and the minimum
the unit value shall not be less than 1,0 N/mm2. Substrates must reach humidity
compensating (concrete and cement screeds max 4%).
Required ground condition
The cement substrate must be prepared by an appropriate method, e.g. by blasting or grinding
a diamond. Not enough load-bearing coatings and dirt should be removed. Pores and capillaries in
very smooth concrete must be opened, the substrate must have a slightly rough structure.
Preparation of the substrate
Ingredient. A stir, Add Component B and then stir vigorously in slow motion
electric stirrer (Max. 400 figs./ min) until a streaked mass of uniform
color. Transfer to another clean container and mix thoroughly again.