Elewacje

Application Cement-free, dispersible putty designed for the Capatect KD System 600 insulation system. It can be used as a renovation tile. Suitable for mounting protective corner profiles. On highly absorbent substrates it can be used as an adhesive.
Pozostałe

MOTIVE Wooden mitre box 300mm

090 106
5,39 €
Die-cut box made of solid wood for clamping slats at 45 or 90 degrees. Useful for making frames, skirting boards , repair and decoration work.
Skrzynki narzędziowe

MOTIVE Tool box 12

100 359
7,36 €
The box is made of durable polypropylene with flexible shapes and interesting colors, has an internal stretcher, which is standard equipment of the series.
Properties Reinforced with fiberglass mesh Flexible Resistant to anti-adhesion agents Easy to use Dimensions: 200 x 20 x 0.7 cm Colour Orange Storage In a dry place, at a temperature above 0° C.
17,38 €
Intended use Plastic profile with integrated fabric strip for a decoupled connection between plaster and on-site laminations. Property Plastic mounting profile Decoupled connection option for on-site laminations Accurate recording in one flight by connector mounting Targeted water management Packaging/Container sizes Cardboard box of 25 pieces Colour...
CAPAROL Capatect-Rolleck
Obecnie brak na stanie
Narożniki i listwy

CAPAROL Capatect-Rolleck

89,30 €
Application For finishing the edges of corners with sharp or flared angles within Capatect systems. Properties 125 x 125 mm fiberglass mesh profile with inner plastic cutter The arms of the angle bar are not connected rigidly, which allows for individual fit in the case of sharp and bifurcated corners Edges can be precisely prepared Prevents the mesh from...
Narożniki i listwy

CAPAROL Capatect Sturzeckwinkel

2,95 €
Description / Material Preformed glass fabric profile for simultaneous use as an inner corner as well as a diagonal reinforcement. Projection: 10cm/20cm/30cm Property Alkali resistant Schiebefest High tensile strength Plasticizer-free Mesh size 4 x 4 mm
Application For the performance of thin layers of putty and plaster in insulation systems in the system with mineral wool and Styrofoam. Also for use on concrete, old mineral plasters, limestone-cement and cement sludge groups PII and PIII. Unsuitable are substrates with salt blooms, plastic and wood substrates, as well as heavily mechanically loaded...
49,20 €
Product description CT 137 ceresit plaster is used for the production of thin-layer plaster on concrete substrates, conventional plasters, gypsum substrates and on gypsum boards, gypsum fiber boards, etc. It can be used as a facade cladding in ceresit systems, insulating the external walls of buildings by the light-wet method using foamed polystyrene...
Destination:Used, among others, as a surface treatment in systems: in the seamless insulation system Capatect CLASSIC B, on uncoated concrete, on Matt bearing surfaces painted with dispersion paints, on mineral bearing surfacesApplication surface:Uncoated concrete, primer plasters, mineral surface plastersAdditional information:Do not use on surfaces with...
Adhesive and grout for the installation of Meldorfer flat veneers in the exterior and interior in the Capatect facade systems. Application Ready-to-use mortar for the bonding and grouting of Meldorfer flat veneers. Substrate pretreatment see technical data sheet Characteristics A2-s1, d0 according to DIN EN 13501-1 (non-combustible) high initial...
103,32 €
Application For the performance of weather-resistant coatings covering and bridging cracks on facade surfaces and concrete surfaces, as well as for the protection of substrates from adverse weather conditions and aggressive air pollution. Properties Water-based, environmentally friendly, low odour Weather resistant Anti-CO2-sd CO2 > 50 m...
Narożniki i listwy

CAPAROL Capatect Dehnfugenprofil

25,98 €
Intended use For the formation of vertical expansion joints within the Capatect ETICS A and B. Type E: for flush joints Type V: for joints in interior corners Property Expansion joints can be precisely pre-worked weather-resistant UV-resistant can be painted over efficient execution in one operation suitable for all insulation thicknesses with pull-off...
8,29 €
Application For forming ends or separating surfaces of plastering expeditions. Allows accurate and clean lateral separation of different structures or colors in one working plane. Properties - Plastic profile, perforated, with separating edge - The same mesh as in the reinforced layer (preserved system materials) - UV resistant - Clean and clear...
Pokazano 1-24 z 26 pozycji
Produkt dodany do listy życzeń
Produkt dodany do porównania

Ta strona używa plików cookies w celu zwiększenia wydajności strony.