CAPAROL Disbon 476 EP-RollSchicht

Product Feature

- Very good chemical resistance

- Resistant to mechanical stress

- Can withstand wet temperatures up to 40 °C

- Permanently wet-resistant

Processing temp./Air humidity

Material, circulating air and substrate temperature:Min. 10 °C, max. 30 °C.The relative humidity must not exceed 80%.

The surface temperature must always be at least 3 °C above the dew point temperature.

Consumption

Roll coating

Smooth surface*:

- Approx. 500 g/m2 per order

Anti-slip surface* 1st operation:

- Approx. 500 g/m2

Dispersion:

- Approx. 3 kg/m2

2nd Operation DisboADD 943 quartz sand mixture 0.4 - 0.8mm, DisboADD 944 quartz sand mixture 0.7 - 1.2mm or granite grit

0.5-1.0mm:

- Approx. 600-800 g/m2

Scratch puttying (asphalt)*:

- Disboxide 476: approx. 1,400 g/mm/m2

- DisboADD 942 quartz sand mixture 0.1 - 0.4 mm: approx. 280 g/mm/m2

*The consumption values vary due to temperature influences, type of application, tool and various spreading materials. Exact

Consumption values are therefore to be determined by sampling on the object. The consumption data in test reports are

Laboratory values (without bulk and shrinkage losses). Deviations from the consumption values on the object are therefore possible.