Application
Sealing compound applied by trowel, for waterproofing according to DIN
18533 in the case of ground moisture, non-pressurized water as well as
temporary seepage water and low-pressure water up to a submersion depth
of 3 m.
For horizontal and vertical surfaces, e.g. basements, underground garages
and retaining walls. It is also suitable for gluing thermal insulation boards
based on polystyrene, polyurethane and PUR foam. It is not suitable for
sealing flat roofs, sealing tanks, indoors and under water pressure.
Properties
tested on the basis of EN 15814
for water resistance classes W1-E, W2.1-E, W3-E u. W4-E according to DIN
18533
plastoelastic
suitable for cold processing
also hardens quickly at low temperatures and high air humidity
good adhesion to concrete, plaster, fiber cement and aerated concrete
can be used on slightly moist surfaces
good stability
Pack size
30 kg combi container: 22 kg mass component (A), 8 kg hardener (B)
Color
black
Storage
in a cool, dry and frost-free place.
The storage stability in the original unopened container is at least 1 year.
Technical data
Crack-bridging:> 2 mm (EN 15812 at 4 ° C)
Cold bending behavior: 0 ° C (EN 15813)
Water permeability: tight (EN 15820, 1 mm joint width)
Rainproof after approx. 4 hours (at 20 ° C).
Density
mixed material: approx. 1.1 kg / l
Dry layer thickness
1 mm dry corresponds to 1.4 mm wet
Chemical resistance
Hardened DisboPROOF 707 Bitu 2K is resistant to water, neutral salts,
diluted lyes and humic acids. Not resistant to acids, oils and solvents.