Termoizolacja elewacji

Application Cement-free, dispersible putty designed for the Capatect KD System 600 insulation system. It can be used as a renovation tile. Suitable for mounting protective corner profiles. On highly absorbent substrates it can be used as an adhesive.
99,20 €
Butyl sealing tape with a centrally split and overlapping release liner. The fleece allows a good adhesive bond with construction chemical substances. Backing: Polypropylene non-woven Coating: Self-adhesive butyl rubber, permanently elastic and resistant to aging.
Application To seal the connection between the Capatect system and other building elements, e.g. windows, balconies, roof cornices, etc. Properties permanently flexible (very good shape memory) adaptable to fugues with large dimensional tolerances does not require pre-treatment of the side surfaces of the fugue does not react with metal, concrete, wood,...
Narożniki i listwy

CAPAROL Capatect Dehnfugenprofil

25,98 €
Intended use For the formation of vertical expansion joints within the Capatect ETICS A and B. Type E: for flush joints Type V: for joints in interior corners Property Expansion joints can be precisely pre-worked weather-resistant UV-resistant can be painted over efficient execution in one operation suitable for all insulation thicknesses with pull-off...
Adhesive and grout for the installation of Meldorfer flat veneers in the exterior and interior in the Capatect facade systems. Application Ready-to-use mortar for the bonding and grouting of Meldorfer flat veneers. Substrate pretreatment see technical data sheet Characteristics A2-s1, d0 according to DIN EN 13501-1 (non-combustible) high initial...
17,38 €
Intended use Plastic profile with integrated fabric strip for a decoupled connection between plaster and on-site laminations. Property Plastic mounting profile Decoupled connection option for on-site laminations Accurate recording in one flight by connector mounting Targeted water management Packaging/Container sizes Cardboard box of 25 pieces Colour...
CAPAROL Capatect-Rolleck
Obecnie brak na stanie
Narożniki i listwy

CAPAROL Capatect-Rolleck

89,30 €
Application For finishing the edges of corners with sharp or flared angles within Capatect systems. Properties 125 x 125 mm fiberglass mesh profile with inner plastic cutter The arms of the angle bar are not connected rigidly, which allows for individual fit in the case of sharp and bifurcated corners Edges can be precisely prepared Prevents the mesh from...
Narożniki i listwy

CAPAROL Capatect Sturzeckwinkel

2,95 €
Description / Material Preformed glass fabric profile for simultaneous use as an inner corner as well as a diagonal reinforcement. Projection: 10cm/20cm/30cm Property Alkali resistant Schiebefest High tensile strength Plasticizer-free Mesh size 4 x 4 mm
Pokazano 1-12 z 40 pozycji
Produkt dodany do listy życzeń
Produkt dodany do porównania

Ta strona używa plików cookies w celu zwiększenia wydajności strony.