CAPAROL DisboPOX 475

CAPAROL DisboPOX 475

€185.16
Tax included
DisboPOX 475

Description

For mineral substrates exposed to medium to very high mechanical and chemical loads

how: flooring in the automotive, metallurgical and electrical industries.

Application

Almost odorless

Can be used as a self-priming coating, on primed substrate with sprinkling

Resistant to chemicals

Possibility to adjust the curing process by using DisboADD 903

Easy in application

Properties

Binder two-component epoxy resin

Store in a cool and dry place.

Material stored at lower temperatures should be at least 24 hours before

starting work move into the room at a pace. okay. 20°C where the work will be carried out.

In the original closed packaging can be stored for at least 1 year.

Method of use

Concrete and cement screed and rigid epoxy coatings.

The substrate must be load-bearing, strong, stable, free of loose particles, dust, oils, fats,

residues of worn rubber and other substances that reduce adhesion.

The surface peel strength shall be on average 1,5 N / mm2 and the minimum

the unit value shall not be less than 1,0 N/mm2. Substrates must reach humidity

compensating (concrete and cement screeds max 4%).

Required ground condition

The cement substrate must be prepared by an appropriate method, e.g. by blasting or grinding

a diamond. Not enough load-bearing coatings and dirt should be removed. Pores and capillaries in

very smooth concrete must be opened, the substrate must have a slightly rough structure.

Preparation of the substrate

Ingredient. A stir, Add Component B and then stir vigorously in slow motion

electric stirrer (Max. 400 figs./ min) until a streaked mass of uniform

color. Transfer to another clean container and mix thoroughly again.

Product Details

428 Items

Reviews (0)

No reviews
Product added to wishlist
Product added to compare.

This website use cookies to increase page performance.