CT 137 ceresit plaster is used for the production of thin-layer plaster on concrete substrates, conventional plasters, gypsum substrates and on gypsum boards, gypsum fiber boards, etc. It can be used as a facade cladding in ceresit systems, insulating the external walls of buildings by the light-wet method using foamed polystyrene...
0.06 mm - 0.3 mm fire-dried fine crystal quartz sand for the production of leveling mortars with Disbon EP resins and for priming with Disboxid 461 EP filler new in the Disboxid parking garage system OS 8.
Destination:Used, among others, as a surface treatment in systems: in the seamless insulation system Capatect CLASSIC B, on uncoated concrete, on Matt bearing surfaces painted with dispersion paints, on mineral bearing surfacesApplication surface:Uncoated concrete, primer plasters, mineral surface plastersAdditional information:Do not use on surfaces with...
As an additive for DisboPUR 305, the coating hardens faster and can be overcoated.
Accelerates curing, shortens the waiting time between layers and is faster to load mechanically.
Keep cool, dry and frost-free.
In original, closed packaging, shelf life of at least 12 months.
For the performance of weather-resistant coatings covering and bridging cracks on facade surfaces and concrete surfaces, as well as for the protection of substrates from adverse weather conditions and aggressive air pollution.
Water-based, environmentally friendly, low odour
Anti-CO2-sd CO2 > 50 m...
To accelerate the curing and faster rework of Disboxide 460, Disboxide 461, Disboxide 462, DisboFLOOR 475 SL and DisboFLOOR 475 OS, DisboFLOOR 495 AS, DisboFLOOR 498 ESD.
Accelerates curing, thus ensuring shorter waiting times between individual operations as well as an earlier mechanical load capacity of the surfaces.
Adhesive and grout for the installation of Meldorfer flat veneers in the exterior and interior in the Capatect facade systems.
Ready-to-use mortar for the bonding and grouting of Meldorfer flat veneers.
see technical data sheet
A2-s1, d0 according to DIN EN 13501-1 (non-combustible)