Application
Used, among others, as a top expedition in systems / on:
the Capatect EPS seamless insulation system,
on non-coated concrete,
primer plasters of groups P II and P III according to DIN 18 550
on Matt bearing surfaces painted with dispersion paints,
on mineral bearing surfaces.
Capatect-Fassadenputze R and K plasters should not be used on surfaces with salt blooms, as well as on plastic or wood substrates.
Properties
With the addition of siloxane, which strengthens the hydrophobicity of the plaster and increases its resistance to soaking
Water-based
Water vapour permeable
Weatherproof, hydrophobic according to DIN 4108
Easy to apply
Environmentally friendly, low odour
Binder: dispersion of synthetic resins according to DIN 18 558
Resistant to alkaline environment, does not wash off
Contains reinforcing fibres (glass ; polyamide)
Contains biocidal products (microbiological protection)
Package size
Bucket 25 kg
Colour
White
It is possible to color in shades from the CaparolColor color collection or in the Caparol 3D System. The plaster is adapted for factory and machine dyeing in the ColorExpress system.
Note: Capatect Fassadenputz plaster with HBW < 20 is not recommended for use in ETICS insulation systems. If for design reasons it is necessary to use a dark color with HBW < 20, the stained plaster should be painted 2 times with CoolProtekt paint or use one of the systems dedicated to dark colors:
Capatect EPS and MW LONGLIFE variety; can use colors with HBW ≥ 15
Capatect EPS variety CARBON colour options with HBW ≥ 10
Capatect MW CARBON variety; color options with HBW > 5
It is possible to independently dye small amounts of material by adding Max. 2% CaparolColor (formerly AlpinaColor) or Amphibolin Vollton - und Abtonfarbe. The addition of more dye creates an excessively rare consistency of the material.
Gloss level
Matt
Storage
Store in a dry place at temp. above 0°C.
