Your cart
There are no more items in your cart
Home
€230.23
Histolith® PremiumSilikat is a particularly high-quality sol-silicate interior paint. The special
combination of mineral binders enables excellent processing properties and a wide range of
applications with the best results. Suitable for particularly valuable and dull matt coatings indoors.
Home
HIstolith LithoSil
€148.01
Histolith® LithoSil is a particularly smooth-running sol-silicate interior paint. Outstandingly
suitable for the production of dull-matt, indoor climate-friendly coatings.
€279.55
Histolith ® Emulsionsfarbe (emulsion paint) is particularly suitable for applying
high-grade coats of paint and paintings in listed/heritage-protected buildings,
due to the special formula.
€68.08
Histolith ® Antik-Lasur (Antique Wall Glaze) is a glaze concentrate for creating
decorative semi-transparent paint coats (glaze/scumble coat) using historical
examples of coatings.
Particularly suitable for texture preserving translucent coats on natural stones.
€126.69
For authentic limewash/whitewash coats (lime painting) in the field of built
heritage preservation (listed buildings). Particularly suitable for coating
calcareous plasters and for the renovation of existing coats of absorbent mineral
paint.
€197.33
Lime slurry, suitable for filling shrinkage cracks and for equalising surfaces in the
field of built heritage preservation (listed buildings).
Particularly suitable for coating calcareous plasters and for the renovation of
existing coats of absorbent mineral paint.
Home
Histolith Innenkalk
€126.69
Suitable for authentic limewash/whitewash coats in the field of built heritage
preservation (listed buildings), but also applicable in living areas.
Particularly suitable for coating calcareous plasters and for the renovation of
existing coats of absorbent mineral paint.
Home
Histolith Fluat
€361.78
Acid fluate (fluosilicate/fluorosilicate), suitable for removing sintered layers/skin
on new renders/plasters before applying silicate paints and also applicable for
the neutralisation of render/plaster surfaces. Furthermore useable for cleaning
existing mineral renders/plasters and coats of mineral paint.
€23.03
Universally applicable lime putty for smoothing wall surfaces in old and new buildings. Also ideal
for historic buildings. Due to the advantageous properties in terms of building physics and building
biology, it is also very well suited to ecological housing construction.
€210.33
Fine-grained silicate render/plaster, suitable for applying decorative textured
coatings and for equalising slightly uneven substrates.
€105.24
High-quality linseed oil paint for limited stable
or dimensionally unstable component parts.
For exterior and interior use.
Home
Histolith Halböl
€145.36
Semi-oil (linseed oil based) primer for wood, non-alkaline renders/plasters and
stucco.
€40.12
The Histolith® trass restoration plaster system is suitable for plastering masonry exposed to
moisture and salt, for both inside and outside. Due to the large pore volume, harmful salts are
stored. In this way, a efflorescence-free and dry surface can be achieved on damp masonry if the
surrounding climate allows drying out.
€39.47
The Histolith® trass restoration render system contains mineral binders in accordance with DIN EN
197-1 (cement, suevit trass) and DIN EN 459-1 (lime) as well as mineral additives in accordance
with DIN EN 13139. The requirements of the WTA data sheet 2-9-04 /D are fulfilled.
€99.99
Non-slip, opaque special primer as an adhesion-promoting pre-coating
for subsequent synthetic resin, silicone resin, silicate and mineral plasters and
Colored stone plaster coatings in the Capatect facade systems.
For well-covering, non-slip base coatings on load-bearing, mineral
Internal surfaces and gypsum boards (GK-plates).
PutzGrund 610 is also...
€9.62
Mineral based dry adhesive mix for the fastening of thermal insulation boards
within the Capatect ETICS A and B
€13.90
Capatect EcoFix 055/20 is a moisture-hardening, self-expanding one-component
polyurethane adhesive foam for the rational, clean, economical and permanently
secure bonding of Capatect EPS thermal insulation boards (mainly provided with
tongue and groove) on facades. The polyurethane foam has a high adhesive
strength on concrete, masonry, render, wood,...
Home
Capatect X-TRA 300
€46.74
Dust reduced adhesive and reinforcment mortar premix to create an high impact
resistant reinforcement layer within Capatect ETICS. Can be used for layer
thicknesses of 3 to 8 mm on EPS insulation boards or 4 to 8 mm on mineral
wool boards.
€155.89
Ready-to-use textured renders with Nano-Quartz Matrix Technology for
Capatect ETICS B
Capatect ETICS Carbon EXTRA
Capatect ETICS Natur+
Uncoated concrete
Plaster layers of mortar groups PII (lime-cement mortar) + PIII (cement mortar)
as per DIN 18550-1
Matt, sound coatings of emulsion paints and silikates
Not suitable for timber and plastic or...
€57.49
Adhesive and base coat for the Capatect facade systems DESIGN KERAMIK,
DESIGN FEINSTEIN and DESIGN GLASMOSAIK.