List of products by brand Caparol

Histolith PremiumSilikat
Out-of-Stock
€230.23
Histolith® PremiumSilikat is a particularly high-quality sol-silicate interior paint. The special combination of mineral binders enables excellent processing properties and a wide range of applications with the best results. Suitable for particularly valuable and dull matt coatings indoors.
HIstolith LithoSil
Out-of-Stock
€148.01
Histolith® LithoSil is a particularly smooth-running sol-silicate interior paint. Outstandingly suitable for the production of dull-matt, indoor climate-friendly coatings.
Histolith Emulsionsfarbe
Out-of-Stock
€279.55
Histolith ®  Emulsionsfarbe (emulsion paint) is particularly suitable for applying high-grade coats of paint and paintings in listed/heritage-protected buildings, due to the special formula.
Histolith Antik Lasur
Out-of-Stock
€68.08
Histolith ®  Antik-Lasur (Antique Wall Glaze) is a glaze concentrate for creating decorative semi-transparent paint coats (glaze/scumble coat) using historical examples of coatings. Particularly suitable for texture preserving translucent coats on natural stones.
Histolith Fassadenkalk
Out-of-Stock
€126.69
For authentic limewash/whitewash coats (lime painting) in the field of built heritage preservation (listed buildings). Particularly suitable for coating calcareous plasters and for the renovation of existing coats of absorbent mineral paint.
Histolith Kalkschlämme
Out-of-Stock
€197.33
Lime slurry, suitable for filling shrinkage cracks and for equalising surfaces in the field of built heritage preservation (listed buildings). Particularly suitable for coating calcareous plasters and for the renovation of existing coats of absorbent mineral paint.
Histolith Innenkalk
Out-of-Stock
€126.69
Suitable for authentic limewash/whitewash coats in the field of built heritage preservation (listed buildings), but also applicable in living areas. Particularly suitable for coating calcareous plasters and for the renovation of existing coats of absorbent mineral paint.
Histolith Fluat
Out-of-Stock
€361.78
Acid fluate (fluosilicate/fluorosilicate), suitable for removing sintered layers/skin on new renders/plasters before applying silicate paints and also applicable for the neutralisation of render/plaster surfaces. Furthermore useable for cleaning existing mineral renders/plasters and coats of mineral paint.
Histolith Kalkspachtel Natur
Out-of-Stock
Universally applicable lime putty for smoothing wall surfaces in old and new buildings. Also ideal for historic buildings. Due to the advantageous properties in terms of building physics and building biology, it is also very well suited to ecological housing construction.
Histolith Strukturierputz
Out-of-Stock
€210.33
Fine-grained silicate render/plaster, suitable for applying decorative textured coatings and for equalising slightly uneven substrates.
Histolith Leinölfarbe
Out-of-Stock
€105.24
High-quality linseed oil paint for limited stable or dimensionally unstable component parts. For exterior and interior use.
Histolith Halböl
Out-of-Stock
€145.36
Semi-oil (linseed oil based) primer for wood, non-alkaline renders/plasters and stucco.
Histolith Trass-Sanierputz
Out-of-Stock
The Histolith® trass restoration plaster system is suitable for plastering masonry exposed to moisture and salt, for both inside and outside. Due to the large pore volume, harmful salts are stored. In this way, a efflorescence-free and dry surface can be achieved on damp masonry if the surrounding climate allows drying out.
Histolith Trass-Porengrundputz
Out-of-Stock
The Histolith® trass restoration render system contains mineral binders in accordance with DIN EN 197-1 (cement, suevit trass) and DIN EN 459-1 (lime) as well as mineral additives in accordance with DIN EN 13139. The requirements of the WTA data sheet 2-9-04 /D are fulfilled.
PutzGrund 610 transparent
Out-of-Stock
Non-slip, opaque special primer as an adhesion-promoting pre-coating for subsequent synthetic resin, silicone resin, silicate and mineral plasters and Colored stone plaster coatings in the Capatect facade systems. For well-covering, non-slip base coatings on load-bearing, mineral Internal surfaces and gypsum boards (GK-plates). PutzGrund 610 is also...
Capatect EcoFix 055/20
Out-of-Stock
€13.90
Capatect EcoFix 055/20 is a moisture-hardening, self-expanding one-component polyurethane adhesive foam for the rational, clean, economical and permanently secure bonding of Capatect EPS thermal insulation boards (mainly provided with tongue and groove) on facades. The polyurethane foam has a high adhesive strength on concrete, masonry, render, wood,...
Capatect X-TRA 300
Out-of-Stock
€46.74
Dust reduced adhesive and reinforcment mortar premix to create an high impact resistant reinforcement layer within Capatect ETICS. Can be used for layer thicknesses of 3 to 8 mm on EPS insulation boards or 4 to 8 mm on mineral wool boards.
Capatect ThermoSan...
Out-of-Stock
Ready-to-use textured renders with Nano-Quartz Matrix Technology for Capatect ETICS B  Capatect ETICS Carbon EXTRA  Capatect ETICS Natur+  Uncoated concrete  Plaster layers of mortar groups PII (lime-cement mortar) + PIII (cement mortar) as per DIN 18550-1 Matt, sound coatings of emulsion paints and silikates  Not suitable for timber and plastic or...
Capatect 190 S Adhesive mass
Out-of-Stock
The adhesive mass, delivered in the form of a dry mineral mortar. It is used to attach thermal insulation materials made of polystyrene. It is a component of CAPATECT seamless insulation systems.
Showing 49-72 of 149 item(s)
Product added to wishlist
Product added to compare.

This website use cookies to increase page performance.