Intended use
Rainproof sealing and construction of connections between Capatect WDV systems and adjacent components, windows, doors, etc. This plaster strip can be pushed, is suitable for windows up to 10 m2 and insulation thicknesses up to 300 mm in the soffit, flush with the facade. 2-piece plaster strip (pre-assembled), with the possibility of 3-dimensional motion recording. A self-adhesive sealing tape is integrated on the 3D plaster strip for fixing the strip.
The profile is to be glued on without screwing.
Property
no rigid connection of the cleaning tray
3D motion capture
flexible connection without screw connection
clean finish
The two-part profile can be pushed into each other
the same fabric as in the surface reinforcement, no non-system material
Protection of the sealing tape by an additional sealing lip
Foil strips for covering the window frame
self-adhesive
permanently sealing
driving rainproof
maintenance-free joints
UV-resistant
easy processing
no subsequent cleaning work
reduced sound transmission
no additional adhesive tape necessary
Packaging/Container sizes
Carton of 25 pieces à 2.2 m = 55 m
Colour
Profile Body: White
Storage
Flat, stress-free, protected from prolonged sunlight and from mechanical stress.
Technical Data
5 mm trigger edge
Fabric strips made of Capatect fabric 650, about 135 mm wide
Material Profile: Polyvinyl Chloride (PVC)
Gasket Material: Thermoplastic Elastomers (TPE)
Plastic profile with PE sealing tape 13 x 3 mm
self-adhesive film
TPE joint and seal
Movement recording by "rubber-like sealing lips and joints"
Profile width = 13 mm