Facade thermal insulation

CAPAROL...
External

CAPAROL CAPATECT-ZF-SPACHTEL 699-CEMENT-FREE SPATULA

€97.17
Application Cement-free, dispersible putty designed for the Capatect KD System 600 insulation system. It can be used as a renovation tile. Suitable for mounting protective corner profiles. On highly absorbent substrates it can be used as an adhesive.
CAPAROL DisboADD 976 Butylband
Masking tapes

CAPAROL DisboADD 976 Butylband

€99.20
Butyl sealing tape with a centrally split and overlapping release liner. The fleece allows a good adhesive bond with construction chemical substances. Backing: Polypropylene non-woven Coating: Self-adhesive butyl rubber, permanently elastic and resistant to aging.
CAPAROL Capatect-Fugendicht...
Tapes

CAPAROL Capatect-Fugendicht Typ 2D

€22.46
Application To seal the connection between the Capatect system and other building elements, e.g. windows, balconies, roof cornices, etc. Properties permanently flexible (very good shape memory) adaptable to fugues with large dimensional tolerances does not require pre-treatment of the side surfaces of the fugue does not react with metal, concrete, wood,...
CAPAROL Capatect...
Corners and strips

CAPAROL Capatect Dehnfugenprofil

€25.98
Intended use For the formation of vertical expansion joints within the Capatect ETICS A and B. Type E: for flush joints Type V: for joints in interior corners Property Expansion joints can be precisely pre-worked weather-resistant UV-resistant can be painted over efficient execution in one operation suitable for all insulation thicknesses with pull-off...
CAPAROL Capatect Meldorfer...
Mineral

CAPAROL Capatect Meldorfer Ansatzmörtel 080 (Zementgrau)

€182.53
Adhesive and grout for the installation of Meldorfer flat veneers in the exterior and interior in the Capatect facade systems. Application Ready-to-use mortar for the bonding and grouting of Meldorfer flat veneers. Substrate pretreatment see technical data sheet Characteristics A2-s1, d0 according to DIN EN 13501-1 (non-combustible) high initial...
CAPAROL Capatect...
Corners and strips

CAPAROL Capatect Gewebeanschlussprofil Blech

€17.38
Intended use Plastic profile with integrated fabric strip for a decoupled connection between plaster and on-site laminations. Property Plastic mounting profile Decoupled connection option for on-site laminations Accurate recording in one flight by connector mounting Targeted water management Packaging/Container sizes Cardboard box of 25 pieces Colour...
CAPAROL Capatect-Rolleck
Out-of-Stock
Corners and strips

CAPAROL Capatect-Rolleck

€89.30
Application For finishing the edges of corners with sharp or flared angles within Capatect systems. Properties 125 x 125 mm fiberglass mesh profile with inner plastic cutter The arms of the angle bar are not connected rigidly, which allows for individual fit in the case of sharp and bifurcated corners Edges can be precisely prepared Prevents the mesh from...
View
CAPAROL Capatect...
Corners and strips

CAPAROL Capatect Sturzeckwinkel

€2.95
Description / Material Preformed glass fabric profile for simultaneous use as an inner corner as well as a diagonal reinforcement. Projection: 10cm/20cm/30cm Property Alkali resistant Schiebefest High tensile strength Plasticizer-free Mesh size 4 x 4 mm
Showing 1-12 of 40 item(s)
Facade thermal insulation
Product added to wishlist
Product added to compare.

This website use cookies to increase page performance.