Caparol

€25.98
Intended use For the formation of vertical expansion joints within the Capatect ETICS A and B. Type E: for flush joints Type V: for joints in interior corners Property Expansion joints can be precisely pre-worked weather-resistant UV-resistant can be painted over efficient execution in one operation suitable for all insulation thicknesses with pull-off...
€8.29
Application For forming ends or separating surfaces of plastering expeditions. Allows accurate and clean lateral separation of different structures or colors in one working plane. Properties - Plastic profile, perforated, with separating edge - The same mesh as in the reinforced layer (preserved system materials) - UV resistant - Clean and clear...
€9.53
Application PVC starting profile with a 55, 100 and 160 mm overhang mounted in the plinth zone as an auxiliary for mounting thermal insulation, used in the system with profile 6680/30. Properties Reduces the formation of thermal bridges in the plinth zone Facilitates installation of thermal insulation Package size 20.0 m per carton (10 pieces x 200 cm...
€17.38
Intended use Plastic profile with integrated fabric strip for a decoupled connection between plaster and on-site laminations. Property Plastic mounting profile Decoupled connection option for on-site laminations Accurate recording in one flight by connector mounting Targeted water management Packaging/Container sizes Cardboard box of 25 pieces Colour...
CAPAROL Capatect-Rolleck
Out-of-Stock
Corners and strips

CAPAROL Capatect-Rolleck

€89.30
Application For finishing the edges of corners with sharp or flared angles within Capatect systems. Properties 125 x 125 mm fiberglass mesh profile with inner plastic cutter The arms of the angle bar are not connected rigidly, which allows for individual fit in the case of sharp and bifurcated corners Edges can be precisely prepared Prevents the mesh from...
Corners and strips

CAPAROL Capatect Sturzeckwinkel

€2.95
Description / Material Preformed glass fabric profile for simultaneous use as an inner corner as well as a diagonal reinforcement. Projection: 10cm/20cm/30cm Property Alkali resistant Schiebefest High tensile strength Plasticizer-free Mesh size 4 x 4 mm
Properties Reinforced with fiberglass mesh Flexible Resistant to anti-adhesion agents Easy to use Dimensions: 200 x 20 x 0.7 cm Colour Orange Storage In a dry place, at a temperature above 0° C.
Application For the performance of thin layers of putty and plaster in insulation systems in the system with mineral wool and Styrofoam. Also for use on concrete, old mineral plasters, limestone-cement and cement sludge groups PII and PIII. Unsuitable are substrates with salt blooms, plastic and wood substrates, as well as heavily mechanically loaded...
Application Cement-free, dispersible putty designed for the Capatect KD System 600 insulation system. It can be used as a renovation tile. Suitable for mounting protective corner profiles. On highly absorbent substrates it can be used as an adhesive.
€49.20
Product description CT 137 ceresit plaster is used for the production of thin-layer plaster on concrete substrates, conventional plasters, gypsum substrates and on gypsum boards, gypsum fiber boards, etc. It can be used as a facade cladding in ceresit systems, insulating the external walls of buildings by the light-wet method using foamed polystyrene...
Destination:Used, among others, as a surface treatment in systems: in the seamless insulation system Capatect CLASSIC B, on uncoated concrete, on Matt bearing surfaces painted with dispersion paints, on mineral bearing surfacesApplication surface:Uncoated concrete, primer plasters, mineral surface plastersAdditional information:Do not use on surfaces with...
Showing 25-48 of 60 item(s)
Product added to wishlist
Product added to compare.

This website use cookies to increase page performance.